阅读理解Beforeanewairlinergoesintoserviceeverypartofitistestedagainandagain.Buttherearetwotestsmoreimportantthanalltheothers.Oneofthemisverystrangeandtheotherisverydangerous.The
阅读理解
Before a new airliner goes into service every part of it is tested again and again. But there are two tests more important than all the others. One of them is very strange and the other is very dangerous.
The first of these is called the“tank test”. A modern airliner must fly at very high altitudes. Air must be pumped into the plane so that the passengers can breathe. The metal structure of the plane has to be very strong for this reason. When the plane is filled with air or“pressurized” the air presses against the skin of the plane inside. The pressure on a small window for example is like a huge giant foot that is trying to get out. If a small part of the plane were to crack the plane would explode in the sky. This is what happened to the first Comets(彗星). In order to test the structure of the plane it is lowered into a huge tank of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is in the air. Finally there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has cracked. This part will be made stronger.
The most dangerous test happens when the new plane is going through test flight in the air. The test pilot must find out exactly what happens when the engines are all shut off at once. He takes the plane up very high. Then he shuts the engines off. The plane begins to fall like a stone. It is the pilot's job to find out how he gets control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
(1)The purpose of the tank test is to find out ________.
[ ]
A.how much air can be pumped into a plane
B.how much air passengers need to breathe at certain altitudes
C.what would happen if the plane crashed in the water
D.if there are any weak parts in the plane that would burst under pressure
(2)The test is carried out under water because ________.
[ ]
A.the pressure of water is greater than air
B.the first Comets crashed in the water
C.there is less damage when the explosion happens under water
D.this is the only way engineers can find out which part has cracked
(3)Why the second important test which the author refers to is mast dangerous one is probably that ________.
[ ]
A.the metal structure of the plane is not very strong
B.the new plane will explode in the sky
C.the test pilot does not know how to get control of the plane
D.the plane begins to fall like a stone
(4)This passage is mainly about ________.
[ ]
A.the plane structure
B.the first Comets
C.the way of pumping air into the plane
D.two important tests
阅读理解
Before a new airliner goes into service every part of it is tested again and again. But there are two tests more important than all the others. One of them is very strange and the other is very dangerous.
The first of these is called the“tank test”. A modern airliner must fly at very high altitudes. Air must be pumped into the plane so that the passengers can breathe. The metal structure of the plane has to be very strong for this reason. When the plane is filled with air or“pressurized” the air presses against the skin of the plane inside. The pressure on a small window for example is like a huge giant foot that is trying to get out. If a small part of the plane were to crack the plane would explode in the sky. This is what happened to the first Comets(彗星). In order to test the structure of the plane it is lowered into a huge tank of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is in the air. Finally there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has cracked. This part will be made stronger.
The most dangerous test happens when the new plane is going through test flight in the air. The test pilot must find out exactly what happens when the engines are all shut off at once. He takes the plane up very high. Then he shuts the engines off. The plane begins to fall like a stone. It is the pilot's job to find out how he gets control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
(1)The purpose of the tank test is to find out ________.
[ ]
A.how much air can be pumped into a plane
B.how much air passengers need to breathe at certain altitudes
C.what would happen if the plane crashed in the water
D.if there are any weak parts in the plane that would burst under pressure
(2)The test is carried out under water because ________.
[ ]
A.the pressure of water is greater than air
B.the first Comets crashed in the water
C.there is less damage when the explosion happens under water
D.this is the only way engineers can find out which part has cracked
(3)Why the second important test which the author refers to is mast dangerous one is probably that ________.
[ ]
A.the metal structure of the plane is not very strong
B.the new plane will explode in the sky
C.the test pilot does not know how to get control of the plane
D.the plane begins to fall like a stone
(4)This passage is mainly about ________.
[ ]
A.the plane structure
B.the first Comets
C.the way of pumping air into the plane
D.two important tests
阅读理解
Before a new airliner goes into service every part of it is tested again and again. But there are two tests more important than all the others. One of them is very strange and the other is very dangerous.
The first of these is called the“tank test”. A modern airliner must fly at very high altitudes. Air must be pumped into the plane so that the passengers can breathe. The metal structure of the plane has to be very strong for this reason. When the plane is filled with air or“pressurized” the air presses against the skin of the plane inside. The pressure on a small window for example is like a huge giant foot that is trying to get out. If a small part of the plane were to crack the plane would explode in the sky. This is what happened to the first Comets(彗星). In order to test the structure of the plane it is lowered into a huge tank of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is in the air. Finally there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has cracked. This part will be made stronger.
The most dangerous test happens when the new plane is going through test flight in the air. The test pilot must find out exactly what happens when the engines are all shut off at once. He takes the plane up very high. Then he shuts the engines off. The plane begins to fall like a stone. It is the pilot's job to find out how he gets control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
(1)The purpose of the tank test is to find out ________.
[ ]
A.how much air can be pumped into a plane
B.how much air passengers need to breathe at certain altitudes
C.what would happen if the plane crashed in the water
D.if there are any weak parts in the plane that would burst under pressure
(2)The test is carried out under water because ________.
[ ]
A.the pressure of water is greater than air
B.the first Comets crashed in the water
C.there is less damage when the explosion happens under water
D.this is the only way engineers can find out which part has cracked
(3)Why the second important test which the author refers to is mast dangerous one is probably that ________.
[ ]
A.the metal structure of the plane is not very strong
B.the new plane will explode in the sky
C.the test pilot does not know how to get control of the plane
D.the plane begins to fall like a stone
(4)This passage is mainly about ________.
[ ]
A.the plane structure
B.the first Comets
C.the way of pumping air into the plane
D.two important tests
矩阵A,B,且AB=BA,怎么证明(A+B)^n=C(n,0)A^n+C(n,1)A^(n-1)B 2020-05-17 …
a^2-(n+1)a+n的解题过程 2020-06-05 …
一道化学平衡的题,用极限思维法做在密闭容器中,A+B=(可逆符号)2C,已知起始是,A,B,C各物 2020-07-23 …
下列说法中正确的是A.N-C的键长比N-N的键长小B.H2O键角是180°,NH3是平面三角形C. 2020-07-31 …
什么是二项式的通式?在二项式定理(a+b)^n=C(n,0)a^n+C(n,1)a^(n-1)b+ 2020-07-31 …
组合数学递推关系看不懂...下了好几份课件,看了很久依然看不懂怎么由特征根方程求得a(n)通项公式 2020-08-01 …
9.下列对一维数组a的正确说明语句为(D)。A)inta(10);B)intn=10,a[n];C 2020-08-03 …
请教:电气绝缘强度表每个线路中A-C/A-B/C-A/A-N/C-N/B-N/A-PE/B-PE/C 2020-12-05 …
1.下列加点字注音没有错误的一项是()。A.教诲(huì)诘责(jí)禁锢(gù)眼翳(yì)B.黝 2020-12-09 …
如果正数数列{an}为等差数列,公差d>0那么下列数列中为等差数列的是A.{根号a(n)}B.{根号 2021-02-04 …