英语翻译过孔技术要求未注公差按GB/T1804-M未注外形倒角C1-C1.5,未注孔口倒角C1M孔未注未注公差-0.2,PIN孔未注公差-0.02刃口面不允许倒角,刃口与产品接触面需抛光R0.8热处理58-62HRC定位销孔在相

Question

英语翻译
过孔

技术要求
未注公差按GB/T1804-M
未注外形倒角C1-C1.5,未注孔口倒角C1
M孔未注未注公差-0.2,PIN孔未注公差-0.02
刃口面不允许倒角,刃口与产品接触面需抛光R0.8
热处理 58-62 HRC
定位销孔
在相应位置刻模号及编号
未注尺寸及公差按采购标准
未注尺寸按3D制作

Answer 1

我也不是很懂英文,我用翻译软件翻的,你参考下：
Through hole
The technical requirements
Unmarked tolerance by GB/T1804-M
Not note shape chamfer C1-C1.5,not C1 injection orifice chamfering
M hole unmarked unmarked tolerance -0.2,PIN hole unmarked tolerance -0.02
Blade surface does not allow the chamfer,the edge and a product contact surfaces should be polished R0.8
Heat treatment of 58-62 HRC
The positioning pin hole
In the corresponding position of engraving,and number of
Unmarked dimensions and tolerances of the procurement according to the standard
Did not note the size according to 3D production