英语翻译1.塑料件间隙,还有些部位有断差,LOGO两边的SUS饰板水平面凹凸都不一至,都需要调整,确保产品档次；2.LOGO太底,太靠近底座,可以尽量的提高,还要确定居中；3.底座不锈钢饰条有间隙,4.

Question

英语翻译
1.塑料件间隙,还有些部位有断差,LOGO两边的SUS饰板水平面凹凸都不一至,都需要调整,确保产品档次；2.LOGO太底,太靠近底座,可以尽量的提高,还要确定居中；3.底座不锈钢饰条有间隙,4.氖灯不够亮,不是很显眼,建议灯罩可以稍凸出些,在不同的角度都可以比较明显的看到工作状态；5.滤网边缘粘贴不规则,也很不整齐;6.本机功能测试OK.外观工艺还须完善；
不用十分准确，只要让老外明白意思即可

Answer 1

1.Plastic parts clearance,also some parts broken difference,LOGO on both sides of the SUS trim level surface is not one to,need to be adjusted,to ensure product quality;2.LOGO too low,too close to the base,can try to improve,but also to determine the base center;3stainless steel trim strip gap,4neon lamp is not bright enough,not very conspicuous,recommends shades can be slightly projecting,at different angles can be obviously seen working state; a 5 screen is stuck to the edge of irregular,it is very neat;6 the machine function test OK.The appearance of technology to improve