早教吧作业答案频道 -->其他-->
英语翻译2-create3folderonyouC:driver/task29thendownloadthefilesandaddedtothisfolderRUUthendownloadthefilesandaddedtothisfolderadbthendownloadthefilesandaddedtothisfolder.3-setuppathforyouradbandfastbootrig
题目详情
英语翻译
2- create 3 folder on you C:driver/task29 then download the files and added to this folder
RUU then download the files and added to this folder
adb then download the files and added to this folder.
3- set up path for your adb and fastboot
right click my computer on yourdesktop pc.advanced system settings.environment variables.then system variables and double click on path.add this line at the end.
just like that==>C:\adb
click ok on everything
4-Hard-SPL setup ( from here on you will need 80% battery life) a must .
[UPG]Hard-SPL Unlocker - Developer Edition - xda-developers
5-Security unlock.
[UPG]Diamond CID/Security/SIM Unlocker - xda-developers
6-task29.
[REF] The DEFINITIVE MTTY Thread!- Diamond Edition - xda-developers
9- test adb.download PdaNetA300x64
make sure the build that you are using have two things working
(1- sdcard mount.
(2- usb debugging
try tiadroid6 on sdcard build.this is what you need to do
(1- boot sd tiadroid6.
( 2- go to settings/applications/development.and check,usb debugging,stay awake,and allow mock locations.
(3- connect you usb.you will see two things.
-- sdcard mount
-- debugging mode enable
-- then disconnect your usb.
(4- download pdanet for android on your windows pc.
(5- when it ask you to plug your usb cable do so.when done.reboot.then boot back to android.
(6- if you already settup your adb then open terminal and cd to your adb folder and add this code
code,adb device,you will get this:000000000000 device,that's ok that's your device ID
- great adb is working
10- setup fastboot (fastboot is done when you flash NBH)
-when you see the blue screen with usb connected fastboot driver will install.that all
11- task29 setup ( this will erasewindows mobiles) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone.press vol down and power.you will see the (tricolour screen!).connect your phone usb.it may install drivers so wait till finish.
-open task29 folder on your c:driver pc
-right click on task29.exe and choose run as administrator andfollow the screen.then the phone will reboot.but it wont pass the htc boot screen,just take the battery out.
12- flashing LK bootloader NBH
- turn off your phone.press vol down and power.you will see the (tricolour screen!).you can flash via sdcard or added to your ruu folder and flash it.
COLOR="red"]13- how to flash recovery.img.
-put battery back and connect your phone usb
-click on power.you will see blue screen look for fastboot mode at the bottom.
-on your pc.go to run type cmd and type this command to get to adb folder on your c:drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished.then to get to recovery mode type
fastboot boot recovery.img
2- create 3 folder on you C:driver/task29 then download the files and added to this folder
RUU then download the files and added to this folder
adb then download the files and added to this folder.
3- set up path for your adb and fastboot
right click my computer on yourdesktop pc.advanced system settings.environment variables.then system variables and double click on path.add this line at the end.
just like that==>C:\adb
click ok on everything
4-Hard-SPL setup ( from here on you will need 80% battery life) a must .
[UPG]Hard-SPL Unlocker - Developer Edition - xda-developers
5-Security unlock.
[UPG]Diamond CID/Security/SIM Unlocker - xda-developers
6-task29.
[REF] The DEFINITIVE MTTY Thread!- Diamond Edition - xda-developers
9- test adb.download PdaNetA300x64
make sure the build that you are using have two things working
(1- sdcard mount.
(2- usb debugging
try tiadroid6 on sdcard build.this is what you need to do
(1- boot sd tiadroid6.
( 2- go to settings/applications/development.and check,usb debugging,stay awake,and allow mock locations.
(3- connect you usb.you will see two things.
-- sdcard mount
-- debugging mode enable
-- then disconnect your usb.
(4- download pdanet for android on your windows pc.
(5- when it ask you to plug your usb cable do so.when done.reboot.then boot back to android.
(6- if you already settup your adb then open terminal and cd to your adb folder and add this code
code,adb device,you will get this:000000000000 device,that's ok that's your device ID
- great adb is working
10- setup fastboot (fastboot is done when you flash NBH)
-when you see the blue screen with usb connected fastboot driver will install.that all
11- task29 setup ( this will erasewindows mobiles) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone.press vol down and power.you will see the (tricolour screen!).connect your phone usb.it may install drivers so wait till finish.
-open task29 folder on your c:driver pc
-right click on task29.exe and choose run as administrator andfollow the screen.then the phone will reboot.but it wont pass the htc boot screen,just take the battery out.
12- flashing LK bootloader NBH
- turn off your phone.press vol down and power.you will see the (tricolour screen!).you can flash via sdcard or added to your ruu folder and flash it.
COLOR="red"]13- how to flash recovery.img.
-put battery back and connect your phone usb
-click on power.you will see blue screen look for fastboot mode at the bottom.
-on your pc.go to run type cmd and type this command to get to adb folder on your c:drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished.then to get to recovery mode type
fastboot boot recovery.img
▼优质解答
答案和解析
2 -创建3个文件夹在你:驱动器/task29下载文件,并添加到这个文件夹
升级程序下载文件,并添加到这个文件夹
亚行下载文件,并添加到这个文件夹.
3 -建立路径为您的亚洲开发银行和这模式
右键点击我的电脑,在电脑系统设置桌面的美丽.环境variables.then系统变量和双击路径.加入这一行结束时.
就像那==>:\亚洲开发银行
单击确定一切
4-hard-spl安装(从这里开始你将需要80%的电池寿命)必须.
[升级]进行解锁或者出现问题的解锁--xda-developers开发版
5-security解锁.
[升级]钻石侦缉/安全/类型-xda-developers
6-task29.
[参考]明确mtty线程!钻石版-xda-developers!
9 -测试项目.pdaneta300x64下载
确保建立您所使用的有2件事工作
(1-sdcard山.
(2-调试
尝试tiadroid6对sdcard建.这是你需要做的
(1-tiadroid6启动标准差.
(2-去设置/应用/发展.检查,调试,保持清醒,并允许模拟地点.
(3-你连接通用串行总线.你会看到的东西.
——sdcard山
——调试模式使
——然后断开的.
(4-下载pdanet机器人在你的电脑.
(5-当你这样做你的电缆插头.完成时.重新启动.然后启动回机器人.
(6-如果你已经settup你亚行然后打开终端和光盘的亚行和文件夹添加此代码
代码,亚行装置,您将得到:000000000000装置,没关系,是你的设备编号
-亚洲开发银行工作
10-安装这模式(这模式是当你闪烁材料低价)
当你看到的蓝色屏幕,通用串行总线连接这模式驱动程序将被安装.都讲完了吗
11 -task29安装(这将erasewindows手机)这个工具是非常重要的闪光与非门或如果您想移动你回电话
-关闭您的手机.按音量下键和电源.你会看到(三色屏幕!)连接你的电话.它可安装驱动程序,等到完成.
开放task29文件夹在你的电脑:司机
task29.exe-右击并选择以管理员身份运行理解的屏幕.然后将重启手机.但它不会通过手机开机画面,就可以取出电池.
12 -闪光路引导材料低价
-关闭您的手机.按音量下键和电源.你会看到(三色屏幕!).你可以通过sdcard闪光或添加到您的升级程序文件夹和闪光.
颜色的“红”]13 -如何闪存recovery.img.
-把电池和手机连接通用串行总线
点击电源.你会看到蓝色屏幕的底部寻找这模式模式.
-在您的电脑上运行命令和去型输入这个命令得到亚行文件夹在您的丙:驱动
光盘:\亚洲开发银行
然后类型
双语对照查看
翻译结果重试
抱歉,系统响应超时,请稍后再试
支持中文、英文免费在线翻译
支持网页翻译,在输入框输入网页地址即可
提供一键清空、复制功能、支持双语对照查看,使您体验更加流畅
升级程序下载文件,并添加到这个文件夹
亚行下载文件,并添加到这个文件夹.
3 -建立路径为您的亚洲开发银行和这模式
右键点击我的电脑,在电脑系统设置桌面的美丽.环境variables.then系统变量和双击路径.加入这一行结束时.
就像那==>:\亚洲开发银行
单击确定一切
4-hard-spl安装(从这里开始你将需要80%的电池寿命)必须.
[升级]进行解锁或者出现问题的解锁--xda-developers开发版
5-security解锁.
[升级]钻石侦缉/安全/类型-xda-developers
6-task29.
[参考]明确mtty线程!钻石版-xda-developers!
9 -测试项目.pdaneta300x64下载
确保建立您所使用的有2件事工作
(1-sdcard山.
(2-调试
尝试tiadroid6对sdcard建.这是你需要做的
(1-tiadroid6启动标准差.
(2-去设置/应用/发展.检查,调试,保持清醒,并允许模拟地点.
(3-你连接通用串行总线.你会看到的东西.
——sdcard山
——调试模式使
——然后断开的.
(4-下载pdanet机器人在你的电脑.
(5-当你这样做你的电缆插头.完成时.重新启动.然后启动回机器人.
(6-如果你已经settup你亚行然后打开终端和光盘的亚行和文件夹添加此代码
代码,亚行装置,您将得到:000000000000装置,没关系,是你的设备编号
-亚洲开发银行工作
10-安装这模式(这模式是当你闪烁材料低价)
当你看到的蓝色屏幕,通用串行总线连接这模式驱动程序将被安装.都讲完了吗
11 -task29安装(这将erasewindows手机)这个工具是非常重要的闪光与非门或如果您想移动你回电话
-关闭您的手机.按音量下键和电源.你会看到(三色屏幕!)连接你的电话.它可安装驱动程序,等到完成.
开放task29文件夹在你的电脑:司机
task29.exe-右击并选择以管理员身份运行理解的屏幕.然后将重启手机.但它不会通过手机开机画面,就可以取出电池.
12 -闪光路引导材料低价
-关闭您的手机.按音量下键和电源.你会看到(三色屏幕!).你可以通过sdcard闪光或添加到您的升级程序文件夹和闪光.
颜色的“红”]13 -如何闪存recovery.img.
-把电池和手机连接通用串行总线
点击电源.你会看到蓝色屏幕的底部寻找这模式模式.
-在您的电脑上运行命令和去型输入这个命令得到亚行文件夹在您的丙:驱动
光盘:\亚洲开发银行
然后类型
双语对照查看
翻译结果重试
抱歉,系统响应超时,请稍后再试
支持中文、英文免费在线翻译
支持网页翻译,在输入框输入网页地址即可
提供一键清空、复制功能、支持双语对照查看,使您体验更加流畅
看了 英语翻译2-create3f...的网友还看了以下:
英语翻译1:那又怎样用英语怎么翻译2:请闭上你的嘴安静下来用英语翻译3:我们都在学习请不要讲话用英 2020-04-08 …
1.给某人提一些意见(汉翻英)2.尽力不去做某事(汉翻英)3.whydon'tyousneakmo 2020-05-13 …
请用with+宾+宾补结构来回答.1:形容词作宾补:因为Tom生病了,他不得不呆在家里.(汉翻英) 2020-05-13 …
中翻英译,人工手翻,英语段落无比好评,Don'ttouch,don'ttouchmyheartis 2020-05-13 …
中翻英译,手翻人工,英语段落感谢无比,标题ruinedRuinedThisistoomuchofa 2020-05-13 …
英语翻译把这句话翻译成英文.2.“我和我姐姐共享一个房间.”翻译英文3.“我通过电话告诉了他这条好 2020-05-17 …
英译2个句子:1.我要在新年之前完成全部作业.2.在这个寒假中,我要提高学习效率,还要复习和预习. 2020-06-16 …
英语翻译2.3cm,距离到底有多长.(翻译成英文)是广告文案,小弟不才英文很烂,又不能胡乱用翻译软件 2020-11-15 …
请高手帮忙翻翻几句话,谢谢,急用!1.春熙路是全国第三大商业步行街.(翻英文)2.盐市口商圈是成都市 2020-12-04 …
中翻英(2句话)“他的兴趣是摄影,他的理想是成为一名优秀的摄影师.把全世界所有漂亮的人或景都拍下来. 2020-12-29 …