我在用ansys模拟的过程中,在进入post1时,出现了如图警告.请问高手这是怎么回事啊啊?The current solution may have been produced using different model or boundary condition data than is currently stored.POST1 results may be e

Question

我在用ansys模拟的过程中,在进入post1时,出现了如图警告.请问高手这是怎么回事啊啊?
The current solution may have been produced using different model or boundary condition data than is currently stored.POST1 results may be erroneous unless you perform a new solution using the stored data.
我是通过循环来移动光源的,在循环过程中,我改变了材料属性

Answer 1

没问题的,就是说你的rst文件与你的db文件不一致了,你核实一下每一个db应该对应的rst就没问题了.
你在循环过程中db可能是改变了,而你的rst可能用的是最后一个,所以产生这样的结果.
总之,db与rst一一对应就不会有这样的警告.