共找到 11 与Switchport 相关的结果，耗时7 ms
● 交换机命令show interfaces type 0/port_# switchport|trunk用于显示中继连接的配置情况，下面是显示例子：2950# show interface fastEthernet0/1 switchportName: fa0/1Switchport: Enab
以下哪个命令用于创建一个trunk?A、switchport mode trunkB、switchport trunk enableC、switchport trunkD、trunk enableA．B．C．D．
以下哪个命令定义了native VLAN?A、nativev lan 1B、switchport native vlan 1C、switchport mode native 1D、switehport trunk native vlan 1A．B．C．D．
A、在Switch1上添加VLAN2B、将Switch1上的f0/4-10接口添加到VLAN2中C、配置Switch1的f0/4-10接口为trunk模式D、查看Switch1的f0/4-10接口模式
A、Switchport mode accessB、Switchport mode trunkC、Switchport mode dynamic autoD、Switchport mode dynamic desirable
A.The command isaccepted and the respective VLAN is added to vlan dat.B.The command isrejected.C.The command isaccepted and you must configure the VL
A.It creates a VLAN 999 interface.B.It designates VLAN 999 for untagged traffic.C.It blocks VLAN 999 traffic from passing on the trunk.D.It designate
A.It designates VLAN 999 for untagged traffic.B.It blocks VLAN 999 traffic from passing on the trunk.C.It creates a VLAN 999 interface.D.It designate
A.The command is accepted and the respective VLAN is added to vlan dat.B.The command is rejected.C.The command is accepted and you must configure the
A.将该端口关闭B.将该端口配置为二层交换端口C.将该端口配置为三层路由端口D.将该端口配置为Trunk端口
热门搜索：