早教吧作业答案频道 -->英语-->
英语翻译FerrouspartsmustconformtoWSS-M99A3-AFurnacebrazing,nickelalloyfillermetalandcopperbrazing.LEAKTEST:coolantcircuit:EGRcoolertobeleaktested,pressuredecaynottoexceed0.01Kpa/second,ataninternalpressureof250Kpa±20
题目详情
英语翻译
Ferrous parts must conform to WSS-M99A3-A
Furnace brazing,nickel alloy filler metal and copper brazing.
LEAK TEST:
coolant circuit:
EGR cooler to be leak tested,pressure decay not to exceed 0.01Kpa/second,at an internal pressure of 250Kpa±20Kpa.
Gas circuit:
EGR cooler to be leak tested,pressure decay not to exceed 0.005Kpa/second,at internal pressure of 250Kpa±20Kpa.
Materials defined by ES/WS-M CALL-OUTS require prior engineering approval.see ford motor company engineering material approved source list.
for current released status,see the wers engineering notice.
corrosion protection for service parts must comply with ford customer service division(FCSD) packaging and shiping guide.
The master source of information for this drawing is in a PE-COMPUTER database changs are not permited without prior consent of the engineering CAD activity.
FORD line trademark,part NR and vendor code to be placed in a suitable location.Size to suit vendor but must be clearly visible.Trademark,coding and part number to specification S86BB-1K266-AA unless otherwise stated.
Unless otherwise stated all dimensions shown on this drawing are for datums,target datus,gauge points and any M/C requirements only.For all other features and dimensions refer to the CAD model.
All unspecified dimensions and features to be measured from the specified 0-0 lines as shown on this drawing when part is located on datums A,B&C.
Part must comply with WASS-M99P23-B material control for black/grey box programs.Material specifications shall be reviewed by the releasing engineer&the affected materials engineering activity,retained by the supplier and available upon request.
Dimension tolerances±1
Angles tolerances±1°
Part must be free from burrs and sharp edges
Must conform to engineering specification
ES-6C1Q-9F464-A_
ITEM3:0/Dφ54±0.3 WALL THICKNESS 1±0.1
Ferrous parts must conform to WSS-M99A3-A
Furnace brazing,nickel alloy filler metal and copper brazing.
LEAK TEST:
coolant circuit:
EGR cooler to be leak tested,pressure decay not to exceed 0.01Kpa/second,at an internal pressure of 250Kpa±20Kpa.
Gas circuit:
EGR cooler to be leak tested,pressure decay not to exceed 0.005Kpa/second,at internal pressure of 250Kpa±20Kpa.
Materials defined by ES/WS-M CALL-OUTS require prior engineering approval.see ford motor company engineering material approved source list.
for current released status,see the wers engineering notice.
corrosion protection for service parts must comply with ford customer service division(FCSD) packaging and shiping guide.
The master source of information for this drawing is in a PE-COMPUTER database changs are not permited without prior consent of the engineering CAD activity.
FORD line trademark,part NR and vendor code to be placed in a suitable location.Size to suit vendor but must be clearly visible.Trademark,coding and part number to specification S86BB-1K266-AA unless otherwise stated.
Unless otherwise stated all dimensions shown on this drawing are for datums,target datus,gauge points and any M/C requirements only.For all other features and dimensions refer to the CAD model.
All unspecified dimensions and features to be measured from the specified 0-0 lines as shown on this drawing when part is located on datums A,B&C.
Part must comply with WASS-M99P23-B material control for black/grey box programs.Material specifications shall be reviewed by the releasing engineer&the affected materials engineering activity,retained by the supplier and available upon request.
Dimension tolerances±1
Angles tolerances±1°
Part must be free from burrs and sharp edges
Must conform to engineering specification
ES-6C1Q-9F464-A_
ITEM3:0/Dφ54±0.3 WALL THICKNESS 1±0.1
▼优质解答
答案和解析
黑色部分必须符合WSS的M99A3 -A炉钎焊,镍和铜合金钎料钎焊.泄漏测试：冷却回路：EGR冷却器被泄漏检测,压力衰减不超过0.01Kpa/second,在一个内部压力250Kpa ± 20Kpa.煤气电路：EGR冷却器被泄漏检测,压力衰减不超过0....
看了 英语翻译Ferrouspar...的网友还看了以下：
英语单词填空(组成单词）1)d.l.e.d.m.i2)l.e.p.o.i.ee3)u.y.g.o. 2020-04-25 …
英语单词辨音找出画（）部分读音与其余不同的单词（）1.A .kn（ee） B.n(e)ck C.r 2020-05-17 …
将字母组成单词,并译成汉语1.m,e,r,m,u,s,汉语2.u,l,t,e,c,u,r,汉语3. 2020-06-04 …
设n（n≥2）阶矩阵A满足（E-A）（E+A）=O，其中E为n阶单位矩阵，若已知E+A的秩r（E+ 2020-06-12 …
重组字母为单词e,e,r,w,he,e,r,t,he,e,se,a,sw,m,s,ir,t,p,i 2020-07-09 …
英语单词填空1.时间状语：d-r-n-2.场所：b-s-s-o-f-r--e-a-t-e-t3.教 2020-07-14 …
—Excuseme.Doyouknowhowtospelltheword"/deim/"?—Sure 2020-10-31 …
—Excuseme.Doyouknowhowtospelltheword"/delm/"?—Sure 2020-10-31 …
英文单词分类填空动物类1.O()t()p()s2.k()t()e()3.l()b()t()r4.a( 2021-02-05 …
这几个字母怎么拼才是单词呢?B-E-E-N-M-O-R-VA-E-R-T-WA-B-C-D-O-P- 2021-02-09 …