早教吧作业答案频道 -->英语-->
Beforeanewtypeofairplanegoesintoservice,everypartofitistestedagainandagain.Buttherearetwoteststhataremoreimportantthanalltheothers.Thefirstiscalledthe"tank(贮水池)test".Amodemairplanemustflyveryhig
题目详情
| Before a new type of airplane goes into service, every part of it is tested again and again. But there are two tests that are more important than all the others. The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger. The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers. 小题1:By doing the "tank test", the engineers can find out _______.
|
| Before a new type of airplane goes into service, every part of it is tested again and again. But there are two tests that are more important than all the others. The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger. The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers. 小题1:By doing the "tank test", the engineers can find out _______.
|
Before a new type of airplane goes into service, every part of it is tested again and again. But there are two tests that are more important than all the others.
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
小题2:What will happen to the plane under the "tank test"?
小题3:According to the text, why are test flights most dangerous?
小题4:What might be the most suitable title for the text?
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
| A．the amount of air in the plane | B．the strength of the plane structure |
| C．the pressure inside and outside the plane | D．the power of the airplane engines |
| A．It will be broken. | B．It will be made stronger. |
| C．It will be filled with water. | D．It will be tested by pilots, |
| A．The plane may explode in the air. | B．The pilot may lose control of the plane. |
| C．The engines may be damaged. | D．Too much air may get into the plane. |
| A．Two Important Tests on Airplanes | B．The Importance of Flying Safely |
| C．The Danger of Testing Airplanes | D．How Airplanes Are Made and Tested |
Before a new type of airplane goes into service, every part of it is tested again and again. But there are two tests that are more important than all the others.
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
小题2:What will happen to the plane under the "tank test"?
小题3:According to the text, why are test flights most dangerous?
小题4:What might be the most suitable title for the text?
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
| A．the amount of air in the plane | B．the strength of the plane structure |
| C．the pressure inside and outside the plane | D．the power of the airplane engines |
| A．It will be broken. | B．It will be made stronger. |
| C．It will be filled with water. | D．It will be tested by pilots, |
| A．The plane may explode in the air. | B．The pilot may lose control of the plane. |
| C．The engines may be damaged. | D．Too much air may get into the plane. |
| A．Two Important Tests on Airplanes | B．The Importance of Flying Safely |
| C．The Danger of Testing Airplanes | D．How Airplanes Are Made and Tested |
Before a new type of airplane goes into service, every part of it is tested again and again. But there are two tests that are more important than all the others.
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
小题2:What will happen to the plane under the "tank test"?
小题3:According to the text, why are test flights most dangerous?
小题4:What might be the most suitable title for the text?
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
| A．the amount of air in the plane | B．the strength of the plane structure |
| C．the pressure inside and outside the plane | D．the power of the airplane engines |
| A．It will be broken. | B．It will be made stronger. |
| C．It will be filled with water. | D．It will be tested by pilots, |
| A．The plane may explode in the air. | B．The pilot may lose control of the plane. |
| C．The engines may be damaged. | D．Too much air may get into the plane. |
| A．Two Important Tests on Airplanes | B．The Importance of Flying Safely |
| C．The Danger of Testing Airplanes | D．How Airplanes Are Made and Tested |
Before a new type of airplane goes into service, every part of it is tested again and again. But there are two tests that are more important than all the others.
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
小题2:What will happen to the plane under the "tank test"?
小题3:According to the text, why are test flights most dangerous?
小题4:What might be the most suitable title for the text?
The first is called the " tank(贮水池) test". A modem airplane must fly very high in the sky. Air must be pumped into the plane so that the passengers can breathe. The metal structure (结构)of the plane has to be very strong for this reason. When the plane is filled with air, the air presses against the skin of the plane inside. The pressure (压力) on a small window is like a huge foot that is trying to get out. If a small part of the plane were to fail, the plane would explode (爆炸)in the sky. To test the structure of the plane, the plane is lowered into a huge tank or container of water. Then it is filled with air. The pressure inside the plane is greater than it ever will be when it is high up in the air. Finally, there is an explosion. This does not cause so much damage inside the water tank as it would anywhere else. Engineers can discover which part of the plane has broken. Then that part is made stronger.
The most dangerous test happens when the new plane is going through test flights in the air. The pilot must find out exactly what happens when the engines (发动机) are all shut off at once. The plane begins to fall like a stone. It is the pilot’s job to find out how he can get control of the plane again. These two tests are examples of how planes are made safe before they ever carry passengers.
小题1:By doing the "tank test", the engineers can find out _______.
| A．the amount of air in the plane | B．the strength of the plane structure |
| C．the pressure inside and outside the plane | D．the power of the airplane engines |
| A．It will be broken. | B．It will be made stronger. |
| C．It will be filled with water. | D．It will be tested by pilots, |
| A．The plane may explode in the air. | B．The pilot may lose control of the plane. |
| C．The engines may be damaged. | D．Too much air may get into the plane. |
| A．Two Important Tests on Airplanes | B．The Importance of Flying Safely |
| C．The Danger of Testing Airplanes | D．How Airplanes Are Made and Tested |
| A．the amount of air in the plane | B．the strength of the plane structure |
| C．the pressure inside and outside the plane | D．the power of the airplane engines |
| A．It will be broken. | B．It will be made stronger. |
| C．It will be filled with water. | D．It will be tested by pilots, |
| A．The plane may explode in the air. | B．The pilot may lose control of the plane. |
| C．The engines may be damaged. | D．Too much air may get into the plane. |
| A．Two Important Tests on Airplanes | B．The Importance of Flying Safely |
| C．The Danger of Testing Airplanes | D．How Airplanes Are Made and Tested |
▼优质解答
答案和解析
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
| 小题1:B 小题1:A 小题1:B 小题1:A |
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
小题1:B
小题1:A
| 略 |
略
略
略
略
略
看了 Beforeanewtype...的网友还看了以下：
关于J.TESTE-F的记述题部分,以及J.TEST的单项最低得分标准1：这么说吧,如果标准答案是 2020-04-06 …
Beforeanewtypeofairplanegoesintoservice,everypart 2020-04-09 …
()命令可以了解test.rpm软件包将在系统里安装哪些文件。A、rpm－Vp test.rpmB、 2020-05-23 …
● 下列页面文件中, (64) 不属于动态页面。 (64)A. test.htm B. test.a 2020-05-26 …
关于左自增左自减,右自增右自减的问题#includeintmain(){intresult;int 2020-06-11 …
在某些Makefile中看到了obj-m:=test.omodule-objs:=test.o请问 2020-07-16 …
#include"include/apue.h"intmain(viod){intfd;if(fd 2020-07-23 …
f:\test\ado\debug\msado15.tlh(407):warningC4146:u 2020-07-23 …
谁能用英文帮我翻译一下《如果我变成回忆》的歌词？[ti:如果我变成回忆][ar:TANK][al:] 2020-11-01 …
英语翻译Re-testarenotincludedinthequotedprice.ifyounee 2020-12-10 …